Subject Material

Crude Oil - Downstream

Published: 16.09.2010, Updated: 03.03.2017
  • Embed
  • Easy Reader
  • Listen
  • Print

Crude oil is the basis for many useful products, but it must first go through a process of separation and purification. Can you name any products from crude oil?

Crude oil downstream

Downstream of Production

Distillation towers at an oil refineryDistillation towers at an oil refineryCrude oils differ a lot. Crude which is extracted under conditions of considerable pressure is usually light and flows easily, while high viscosity crude is found under conditions of low pressure. The former usually contains   a considerable amount of dissolved gas, while the latter contains little or no dissolved gas, but a lot of sulphur. North Sea oil is usually light and is considered to be of high quality.  The variation in types of crudes means that they will vaporise at different temperatures, and this is an essential property when entering the fractionating tower  at a refinery onshore.

Fractional Distillation

The crude feed is preheated before it enters the fractionator. The hot feed is pumped into the fractionating tower and a mixture of vapours is formed which will vaporise at different levels depending on the individual boiling points. The most volatile fractions will come out   at the top (refinery gas and LPG), while the heaviest long-chained fractions will leave the tower at the bottom. The different fractions will be separated by means of trays in the fractionating tower into the basic fractions.
In a simple refinery this will mean six basic cuts or fractions:

  • LPG (liquefied petroleum gas)
  • Gasoline
  • Naphtha
  • Kerosene
  • Gas Oil
  • Residue

Take a look at these videos about crude oil refining.

Fractional Distillation   Distillation Tower 

Cracking

Cracking is a process where long-chained hydrocarbons are cracked or broken to form smaller molecules. This process is carried out to increase the yield of medium or residual cuts. This is accomplished in different ways, such as thermal cracking or catalytic cracking.

A catalyst is used to speed up the process. In catalytic cracking a medium or residual cut from a crude distillation unit is preheated and pumped into the reactor. On its way to the reactor, a suitable catalyst is mixed with the hot feed and they are both carried to the reactor where the cracking takes place and the long-chained hydrocarbons are broken or converted into two or more smaller hydrocarbons. As stated the catalyst speeds up this process, but it does not change chemically. So the catalyst flows back to the regenerator where the carbon deposited on it during the process is burnt off. The ‘cleaned’ catalyst is then again mixed with hot feed from the preheater.The cracked mixture leaves the reactor and flows to the fractionating tower where it is distilled. (See fractional distillation)

Crude Oil Products

The majority of the distilled and cracked refinery products end up as fuel of one kind or another. They include fuels like gasoline (petrol), diesel and aviation fuels. They are also used in the production of lubricants, waxes and solvents. However, a considerable amount is also refined into petrochemicals, which are any crude oil product derived from crude oil and natural gas. Petrochemicals are used in the manufacture of numerous products such as synthetic rubbers and synthetic fibres, polyester, plastics, detergents, fertilizers and pesticides. Petrochemicals also have an enormous impact on the production of our food, our clothes, health care equipment and on how our homes are built.

Comprehension

Complete the sentences using information from the text.

  1. Under conditions of low pressure, _______________________ is found.   
  2. North Sea oil is ______________________________.
  3. Different types of crude oil can be separated by ________________________ because they _________________________.
  4. The __________________________ come out at the top of the fractionating tower.
  5. The __________________________ come out at the bottom of the tower
  6. Cracking is  _____________________________________.
  7. A catalyst is used ___________________________.
  8. Some examples of products from crude oil are ____________________________________.
  9. Petrochemicals are used to make ___________________________________________, for example.

 

Suggested solution
  1. Under conditions of low pressure, high viscosity crude oil is found.
  2. North Sea oil is light and of high quality.
  3. Different types of crude oil can be separated by fractional distillation because they vaporise at different temperatures.
  4. The most volatile fractions come out at the top of the fractionating tower.
  5. The long-chained fractions come out at the bottom of the tower.
  6. Cracking is a process where long-chained hydrocarbons are broken into smaller molecules.
  7. A catalyst is used to speed up the process.
  8. Some examples of products from crude oil are gasoline (petrol), diesel, aviation fuels, lubricants, waxes, solvents and petrochemicals.
  9. Petrochemicals are used to make synthetic rubbers and synthetic fibres, polyester, plastics, detergents, fertilizers and pesticides, for example.
Hide

 

Vocabulary

Try the vocabulary task in the link collection.

 

Pair Work

Do the interactive task in the link collection "Fractional Distillation sentences".

Then work in pairs and take turns describing the Fractional Distillation process to each other in your own words.

 

 

Tasks

General

Related content

General